Anorectal Manometry
Nexam Pro User Manual
149
Endurance squeeze setting
When placing the endurance squeeze markers, two channel markers will be
automatically placed on the EAS channel as defined in the channel definition
(
Settings > Channel definition)
. The first channel marker will be placed on
the maximum pressure between the two endurance squeeze markers. The
second channel marker will be placed a certain time later. This time can be
specified as the squeeze time in this dialog.
RAIR setting
You can set the RAIR marker mode to five markers instead of two. The
2
Marker RAIR
mode is recommended,
5 Marker RAIR
is still supported for
users who are used to it.
Compliance calculation settings
When balloon compliance calibration is performed the compliance calculation
will compensate for the obtained balloon compliance. If for some reason this is
not desired, you can disable the balloon compensation with this option.
Load and save defaults
The anorectal-settings dialog is enhanced with options to load and save the
default settings. The default settings will also be assigned automatically to all
new investigations.
9.5.4
Results
In the analysis program, choose
Results
>
display Results
from the menu to
display the calculated parameters. Some parameters will be calculated after
placing the corresponding markers.
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
