250
Nexam Pro User Manual
Appendix A
CAUTION
When using the Bluetooth puller, do not clamp the
catheter at the position of a pressure transducer, as this
will damage the transducer permanently.
CAUTION
Use rechargeable AA batteries (
≥ 2300 mAh NiMH) of
good quality only and replace all four at once.
CAUTION
After low battery indication, connect the power adapter
within five minutes and charge the batteries. The
Bluetooth puller is fully operational when the power
adapter is connected and can be used to perform
investigations.
CAUTION
Remove the batteries when the Bluetooth puller is not
used, and the power adapter is not connected.
NOTE
Environmental conditions (i.e., thick walls/doors, iron in
walls/doors) may compromise the Bluetooth connection
of the puller and battery lifetime.
Bluetooth Smart Long Range USB dongle (BT-SLR)
The BT-SLR uses a transceiver module which complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. This device contains FCC-ID: QOQBLE121LR, IC: 5123A-
BGTBLE121LR.
Catheters and accessories
WARNING
Use only sterile filling liquids and sterile pump tubes with
part number
NPU 275/C
for the pump.
WARNING
Use only disinfected or sterile catheters.
WARNING
Do not use the catheter if the package is damaged.
CAUTION
Always check the expiration date where applicable as
this may affect the measurement results.
Summary of Contents for Nexam Pro CIM
Page 1: ...Nexam Pro User Manual...
