35
F44
Not used
F45m
Not used
F48
Not used
F49
OFF*
It enables the buzzer warning beep when the motor thrust power limit is reached (refer to the paragraph
"Functional testing").
S
ON
It disables the buzzer warning beep when the motor thrust power limit is reached.
F50
Not used
F51
Not used
F52
Not used
F53
Not used
F54
Not used
F55
Not used
F56
Not used
F57
Not used
F58
Not used
F59
Not used
F60
Not used
F61
Not used
F62
Not used
F63
Not used
F64
Not used
F65
Not used
F66
Not used
F67
Not used
F68
Not used
F69
Not used
F70
Not used
F71
Not used
F72
Not used
F73
OFF*
Opening leaf braking stage start in advance with relation to the end of the manoeuvre..
S
ON
Opening leaf braking stage start corresponding to the last degrees of the manoeuvre.
F74
Not used
F75
Not used
F76
Not used
F77
OFF*
Privacy Function not active
ON
Privacy Function active (Please check paragraph “PRIVACY FUNCTION”)
F78
Function
active if
F77 = ON
OFF*
for maglock without status sensor open/closed (factory setting) The operator NEXT 120S is automatically
detecting the close door status.
ON
Read this function just in case you install a maglock with status sensor open/closed
(not supplied by Label)
for maglock with status sensor open/close. Connect the N.O output contact of the status sensor to the
input AUX1 on NEXT‑L120S control unit in order to detect the close door status.
F79
Function
active if
F77 = ON
OFF
The traffic light (D) show steady green light during the door movement and until the locking impulse is
given by the user.
ON*
The traffic light (D) slowly flashes red/green light during the door movement and then rapidly at door
closed until the locking impulse is given by the user.
As soon as the door is closed, the traffic light will show red light.
F80
OFF*
Cyclic function OFF
ON
Cyclic function ON.
It activates the continuous door opening and closing cycle; it is only used for operation or durability tests.
