manualshive.com logo in svg

L3Harris Narda SignalShark, User Manual

The L3Harris Narda SignalShark delivers unmatched performance in signal analysis. To get the most out of this advanced product, you can easily access a comprehensive User Manual for free. Download this essential manual from manualshive.com to unleash the full potential of your SignalShark and optimize your signal analysis capabilities.

Share
Download
background image

Quick Start 

 

  

  

 

9 

Record demodulated signals (Demod. Recorder) ......................................................... 131 
Setting the demodulation volume (Demod. Volume) ..................................................... 131 

Peak Table ........................................................................................................................... 133 

Peak Table View ............................................................................................................... 133 

Available buttons ........................................................................................................... 133 

Peak Table View ............................................................................................................... 134 

Available buttons ........................................................................................................... 134 

Setting the reference level / attenuation value (Ref. Level / Attenuator) .......................... 135 

Setting the reference level (Ref. Level) ......................................................................... 136 
Setting the attenuator value (Attenuator) ...................................................................... 136 
Selecting the RF input (Input) ....................................................................................... 136 
Lowering/rising the level by 5 dB (+5 dB / -5 dB) .......................................................... 136 

Setting the measurement frequency (Fcent / Fspan, Fstart / Fstop) ................................ 137 

Selecting the measurement frequency .......................................................................... 137 
If Entry Mode is set to Fcent ......................................................................................... 137 
If Entry Mode is set to Fstart ......................................................................................... 138 

Setting the resolution / EMC bandwidth (RBW / EBW) ..................................................... 138 

Setting the resolution / EMC bandwidth (RBW / EBW) ................................................. 139 
Selecting the filter type .................................................................................................. 139 
Settings in the context menu ......................................................................................... 139 

Setting the measurement time (Meas. Time) .................................................................... 140 
Configuring the measurement performance (Config) ....................................................... 140 

Setting the lower and upper frequency limits (Lower Freq. Lim. / Upper Freq. Lim.) .... 140 
Setting the threshold (Threshold) .................................................................................. 140 
Switching limits on / off (Limits) ..................................................................................... 140 
Setting the scan count number (Scan Count) ............................................................... 141 
Defining the stop behavior (Stop Mode) ........................................................................ 141 
Editing the peak excursion value (Peak Excursion) ...................................................... 141 
Exclude low frequencies (Exclude LO) ......................................................................... 141 

Selecting traces (Traces) .................................................................................................. 141 
Changing general display settings (Display) ..................................................................... 143 

Unit ................................................................................................................................ 143 
Sort by ........................................................................................................................... 143 
Show Transmission ....................................................................................................... 143 
Other Traces ................................................................................................................. 143 

Bearing View ........................................................................................................................ 145 

Bearing View ..................................................................................................................... 145 

Available buttons ........................................................................................................... 145 

Bearing View ..................................................................................................................... 146 

Available buttons ........................................................................................................... 147 

Setting the reference level / attenuation value (Ref. Level / Attenuator) .......................... 148 

Setting the reference level (Ref. Level) ......................................................................... 149 
Setting the attenuator value (Attenuator) ...................................................................... 149 

Summary of Contents for Narda SignalShark








































































































































































































































Reviews:

No comments

Related manuals for Narda SignalShark

Van Walt GA5000 Quick Start Manual preview
GA5000
Brand: Van Walt Pages: 2
Hammond B-3 Owner'S Manual preview
B-3
Brand: Hammond Pages: 130
J.P. Instruments EDM-900 Pilot'S Manual Addendum preview
EDM-900
Brand: J.P. Instruments Pages: 9
J.ASSY VISUM Monitor Technical Manual preview
VISUM Monitor
Brand: J.ASSY Pages: 13
jenway PFP7 Operating Manual preview
PFP7
Brand: jenway Pages: 50
jenway 7300 Operating Manual preview
7300
Brand: jenway Pages: 62
Panasonic LP-V10U-C Specification Sheet preview
LP-V10U-C
Brand: Panasonic Pages: 1
Victron energy BMV-710H Manual preview
BMV-710H
Brand: Victron energy Pages: 46
Tektronix P6460 Instructions Manual preview
P6460
Brand: Tektronix Pages: 20
Velleman NETBSEM User Manual preview
NETBSEM
Brand: Velleman Pages: 15
Konica Minolta CM-3700A Instruction Manual preview
CM-3700A
Brand: Konica Minolta Pages: 42
Kobold KSK Operating Instructions Manual preview
KSK
Brand: Kobold Pages: 12
Laserworld GREEN-4000 532 Manual preview
GREEN-4000 532
Brand: Laserworld Pages: 5
XS Instruments 70 Vio Series Instruction Manual preview
70 Vio Series
Brand: XS Instruments Pages: 41
Omega HHM598F Manual preview
HHM598F
Brand: Omega Pages: 13
Oceanic DATATRANS Owner'S Manual preview
DATATRANS
Brand: Oceanic Pages: 114
T Scale TW20 Series Operation Manual preview
TW20 Series
Brand: T Scale Pages: 64
Ress SK7 Manual preview
SK7
Brand: Ress Pages: 11

Brands by name

Popular brands

Load more brands