manualshive.com logo in svg

L3Harris Narda SignalShark, User Manual

The L3Harris Narda SignalShark delivers unmatched performance in signal analysis. To get the most out of this advanced product, you can easily access a comprehensive User Manual for free. Download this essential manual from manualshive.com to unleash the full potential of your SignalShark and optimize your signal analysis capabilities.

Share
Download
background image

Quick Start 

 

  

  

 

7 

Inf. Mx/Mn ....................................................................................................................... 99 
Squelch ........................................................................................................................... 99 

Changing display settings (Display and Tone) ................................................................... 99 

Changing display settings ............................................................................................... 99 

Demodulation (Demod.) .................................................................................................... 102 

Setting Ref. Level, Atten., Ftune and CBW/EBW .......................................................... 102 
Selecting a demodulation type (Demod. Type) ............................................................. 102 
Inheriting a demodulation type from the transmitter table (Tx. Tab –> Type) ............... 102 
Setting the squelch level (Squelch) ............................................................................... 102 
Record demodulated signals (Demod. Recorder) ......................................................... 102 
Setting the demodulation volume (Demod. Volume) ..................................................... 103 

Persistence View .................................................................................................................. 105 

Persistence View .............................................................................................................. 105 

Available buttons ........................................................................................................... 105 

Persistence View .............................................................................................................. 106 

Available buttons ........................................................................................................... 106 

Setting the reference level / attenuation value (Ref. Level / Attenuator) .......................... 107 

Setting the reference level (Ref. Level) ......................................................................... 108 
Setting the attenuator value (Attenuator) ...................................................................... 108 
Selecting the RF input (Input) ....................................................................................... 108 
Lowering/rising the level by 5 dB (+5 dB / -5 dB) .......................................................... 108 

Setting the Lmax value ..................................................................................................... 109 
Setting the Lrange value ................................................................................................... 109 
Setting the measurement frequency (Fcent / Fspan, Fstart / Fstop) ................................ 110 

Selecting the measurement frequency .......................................................................... 110 
If Entry Mode is set to Fcent ......................................................................................... 110 
If Entry Mode is set to Fstart ......................................................................................... 111 

Setting the resolution / EMC bandwidth (RBW / EBW) ..................................................... 111 

Setting the resolution / EMC bandwidth (RBW / EBW) ................................................. 112 
Selecting the filter type .................................................................................................. 112 
Settings in the context menu ......................................................................................... 112 

Setting the measurement time (Meas. Time) .................................................................... 113 
Configuring the measurement performance (Config) ....................................................... 113 

Selecting the persistence type (Pers. Type) ................................................................. 113 
Setting the scan count number (Scan Count) ............................................................... 113 
Defining the stop behavior (Stop Mode) ........................................................................ 113 

Changing the general display settings .............................................................................. 114 

Lmax ............................................................................................................................. 114 
Lrange ........................................................................................................................... 114 
Unit ................................................................................................................................ 115 
Freq. Axis ...................................................................................................................... 115 
Max. Probability / Min. Probability ................................................................................. 115 
Limits ............................................................................................................................. 115 

Summary of Contents for Narda SignalShark








































































































































































































































Reviews:

No comments

Related manuals for Narda SignalShark

Keithley 486 Quick Reference Manual preview
486
Brand: Keithley Pages: 48
Kane 100-1 Manual preview
100-1
Brand: Kane Pages: 19
XS Scuba MultiMax Service Manual preview
MultiMax
Brand: XS Scuba Pages: 24
Campbell KH20 User Manual preview
KH20
Brand: Campbell Pages: 22
Campbell EE181 Instruction Manual preview
EE181
Brand: Campbell Pages: 32
Campbell CS511 Instruction Manual preview
CS511
Brand: Campbell Pages: 40
Campbell CR3000 Micrologger Quick Using Manual preview
CR3000 Micrologger
Brand: Campbell Pages: 12
R.M. Young 27106T Quick Start Manual preview
27106T
Brand: R.M. Young Pages: 8
Campbell 27106T Product Manual preview
27106T
Brand: Campbell Pages: 21
S.E. International USB Inspector Operation Manual preview
USB Inspector
Brand: S.E. International Pages: 30
SZBJ BM5263 Operator'S Manual preview
BM5263
Brand: SZBJ Pages: 2
Dräger Alcotest 7000 Instructions For Use Manual preview
Alcotest 7000
Brand: Dräger Pages: 538
Ansul WOM-3 Installation, Operation & Maintenance Manual preview
WOM-3
Brand: Ansul Pages: 24
ENDA ETS1410 Manual preview
ETS1410
Brand: ENDA Pages: 2
Heinrichs TM Operating Manual preview
TM
Brand: Heinrichs Pages: 31
JUMO LOGOSCREEN 601 Manual preview
LOGOSCREEN 601
Brand: JUMO Pages: 24
Teledyne Lecroy Frontline 802.11 Hardware And Software Manual preview
Frontline 802.11
Brand: Teledyne Lecroy Pages: 223
DriveTest BIA Class 2 Manual preview
BIA Class 2
Brand: DriveTest Pages: 24

Brands by name

Popular brands

Load more brands