L3Harris Narda SignalShark, User Manual

Page: 111 / 231

Persistence View
111
Press the Esc key to close the context menu.
If Entry Mode is set to Fstart
Setting the start frequency (Fstart)
1.
Tap the
Fstart
button.
2. Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Setting the stop frequency (Fstop)
1. Tap the Fstop button.
2. Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Switching the Fc ent ↔ Ftune function on / off
1. Tap the Fcent ↔ Ftune button to switch it on / off.
Setting the step width (Fstep)
1. Tap the Fstep button.
2.
Enter the required value and select a unit.
The setting is accepted immediately and the dropdown list is closed.
Selecting a transmitter table (Transmitter Tab.)
1. Tap the Transmitter Tab. button.
2. Select a transmitter table from the dropdown list and after confirming with OK the list is
closed.
Setting the Rotary Mode
1. Tap the Rotary Mode button.
2. Select the required value from the dropdown list and close the list using the x button.
Press the Esc key to close the context menu.
Setting the resolution / EMC bandwidth (RBW /
EBW)
Here you can do the following:
1. Set the resolution bandwidth ( RBW ) or EMC bandwidth ( EBW ).
2. Enable automatic setting of the resolution bandwidth ( Auto RBW ) or EMC bandwidth
(
Auto EBW
).
3. Set the Fspan -> RBW function On or Off .
4. Select the filter type ( Filter Type ).
Normal and EMC filter types:
The normal filter types resolution bandwidth ( RBW ) or channel bandwidth ( CBW ) allows
you to select a narrow frequency range with the desired bandwidth from a wideband