manualshive.com logo in svg

L3Harris Narda SignalShark, User Manual

The L3Harris Narda SignalShark delivers unmatched performance in signal analysis. To get the most out of this advanced product, you can easily access a comprehensive User Manual for free. Download this essential manual from manualshive.com to unleash the full potential of your SignalShark and optimize your signal analysis capabilities.

Share
Download
background image

SignalShark User Manual 

 

  

  

 

8 

Demodulation (Demod.) .................................................................................................... 116 

Setting Ref. Level, Atten., Ftune and CBW/EBW .......................................................... 116 
Selecting a demodulation type (Demod. Type) ............................................................. 116 
Inheriting a demodulation type from the transmitter table (Tx. Tab –> Type) ............... 116 
Setting the squelch level (Squelch) ............................................................................... 116 
Record demodulated signals (Demod. Recorder) ......................................................... 116 
Setting the demodulation volume (Demod. Volume) ..................................................... 117 

Spectrogram View ................................................................................................................ 119 

Spectrogram View ............................................................................................................ 119 

Available buttons ........................................................................................................... 119 

Spectrogram View ............................................................................................................ 120 

Available buttons ........................................................................................................... 121 

Setting the reference level / attenuation value (Ref. Level / Attenuator) .......................... 121 

Setting the reference level (Ref. Level) ......................................................................... 122 
Setting the attenuator value (Attenuator) ...................................................................... 122 
Selecting the RF input (Input) ....................................................................................... 122 
Lowering/rising the level by 5 dB (+5 dB / -5 dB) .......................................................... 122 

Setting the Lmax value ..................................................................................................... 123 
Setting the Lrange value ................................................................................................... 123 
Setting the measurement frequency (Fcent / Fspan, Fstart / Fstop) ................................ 124 

Selecting the measurement frequency .......................................................................... 124 
If Entry Mode is set to Fcent ......................................................................................... 124 
If Entry Mode is set to Fstart ......................................................................................... 125 

Setting the resolution / EMC bandwidth (RBW / EBW) ..................................................... 126 

Setting the resolution / EMC bandwidth (RBW / EBW) ................................................. 126 
Selecting the filter type .................................................................................................. 126 
Settings in the context menu ......................................................................................... 126 

Setting the measurement time (Meas. Time) .................................................................... 127 
Configuring the measurement performance (Config) ....................................................... 127 

Setting the number of spectrogram frames (Sgram Frames) ........................................ 127 
Setting the scan count number (Scan Count) ............................................................... 128 
Defining the stop behavior (Stop Mode) ........................................................................ 128 

Setting the detectors (Detectors) ...................................................................................... 128 
Changing general display settings (Display) ..................................................................... 129 

Lmax ............................................................................................................................. 129 
Lrange ........................................................................................................................... 129 
Unit ................................................................................................................................ 130 
Freq. Axis ...................................................................................................................... 130 

Demodulation (Demod.) .................................................................................................... 130 

Setting Ref. Level, Atten., Ftune and CBW/EBW .......................................................... 130 
Selecting a demodulation type (Demod. Type) ............................................................. 130 
Inheriting a demodulation type from the transmitter table (Tx. Tab –> Type) ............... 131 
Setting the squelch level (Squelch) ............................................................................... 131 

Summary of Contents for Narda SignalShark








































































































































































































































Reviews:

No comments

Related manuals for Narda SignalShark

Keithley 580 Operator'S Manual preview
580
Brand: Keithley Pages: 73
Makita LD080P Quick Start preview
LD080P
Brand: Makita Pages: 2
Makita LD060P Instruction Manual preview
LD060P
Brand: Makita Pages: 16
Keithley System SourceMeter 2601B Instrument Specifications preview
System SourceMeter 2601B
Brand: Keithley Pages: 13
Keller-druck LEX 1 Ei Manual preview
LEX 1 Ei
Brand: Keller-druck Pages: 8
QUBINO Smart meter Manual preview
Smart meter
Brand: QUBINO Pages: 2
Keller dv-2 Operating Manual preview
dv-2
Brand: Keller Pages: 4
PITSID NIP CON SMART Operation Manual preview
NIP CON SMART
Brand: PITSID Pages: 22
Swan Analytical Instruments AMI Silica Operator'S Manual preview
AMI Silica
Brand: Swan Analytical Instruments Pages: 102
SKF Microlog GX Series User Manual preview
Microlog GX Series
Brand: SKF Pages: 342
PASCO WA-7428 Product Manual preview
WA-7428
Brand: PASCO Pages: 4
Datcon DT4120 PS Series Operating Instructions Manual preview
DT4120 PS Series
Brand: Datcon Pages: 92
FM Marin Gobius 4 Waste Installation Manual preview
Gobius 4 Waste
Brand: FM Marin Pages: 8
ThermoFisher Scientific Thermo Scientific iCE 3000 Series Pre-Installation Manual preview
Thermo Scientific iCE 3000 Series
Brand: ThermoFisher Scientific Pages: 42
Young 86000-SDI Instructions preview
86000-SDI
Brand: Young Pages: 5
BIRD SiteHawk SK-6000 Operation Manual preview
SiteHawk SK-6000
Brand: BIRD Pages: 69
Endress+Hauser 11362Z Safety Instructions preview
11362Z
Brand: Endress+Hauser Pages: 24
Integra Ri3 Installation And Operating Instructions Manual preview
Ri3
Brand: Integra Pages: 32

Brands by name

Popular brands

Load more brands