L3Harris Narda SignalShark, User Manual

Page: 184 / 231

SignalShark User Manual
184
increases with the number of direction finder locations and the number of bearings. It is
therefore usual to collect bearings from more than two direction finder locations before the
localization process is completed.
If only one direction finder is available, it will have to be moved to different locations over
time.
Base settings
Selected Map
A map based on OSM slippy maps
Data Type
Localization
Select Ftune
Select Ftune according to the bearing View
Data Logger –> Working Directory
You can add or select a folder in the data logger menu and define it as “Active Working
Directory”. All measurement data including bearings and bearing records will be stored in this
directory. The currently set Active Working Directory is marked by a green dot in the
corresponding folder icon of the TreeView.
Display settings
Center
Centers the map to the current GNSS position.
Current Position
Shows the current position on the map.
“On” is recommended.
Current Direction
Shows the current direction as an arrow.
•
For Continuous Localization “Velocity Direction” is recommended.
•
For manual bearing (Level Meter or Horizontal Scan”) “Handle Azimuth” is recommended.
Bearing Lines
Visualizes the line of bearing.
“Infinite” is recommended.
Loc- Result
Shows the localization result as latitude and longitude value in the map.
“On” is recommended.