L3 2100-1010-00 Component Maintenance Manual With Illustrated Parts List Download

Page: 169 / 334

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Rev. 15 Page 120

Apr. 14/16

Testing & Fault Isolation

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

(6)

Rotor Speed

Part 1 – Record simulated 6000 Hz rotor speed data and verify data is within 2% of
sent frequency.

Part 2 – Record simulated 7 Hz rotor speed data and verify data is within 2% of sent
frequency.

Example report message(s):

08:03:52 PASSED Rotor Speed 6000 Hz (Expected 4 patterns > 5880.0 Hz <
6120.0 Hz) Results = 5998.0 Hz, 6026.4 Hz, 6026.4 Hz, 6026.4 Hz

08:04:03 PASSED Rotor Speed 7 Hz (Expected 4 patterns > 6.9 Hz < 7.1 Hz)
Results = 7.0 Hz, 7.0 Hz, 7.0 Hz, 7.0 Hz

(7)

Channel Balance

Record simulated 1000 Hz

reference level data for each channel 1,2,3 and 4 and

verify amplitude all within 3 dB.

Record simulated 1000 Hz 1/10 reference level data for each channel 1,2,3 and 4
and verify amplitude all within 3 dB.

Example report message(s):

08:04:52 PASSED Channel Bal 1000 Hz 0.5 ref (All within 3 dB) Results = HQ1
5.2 /HQ2 5.3 /HQ3 5.1 /HQC 5.1 /SQV1 5.0 /SQV2 5.4 /SQV3 5.4 /SQC 5.5
dBV

08:05:40 PASSED Channel Bal 1000 Hz 0.1 ref (All within 3 dB) Results = HQ1

−

8.3 /HQ2

−

8.2 /HQ3

−

8.4 /HQC

−

9.4 /SQV1

−

8.0 /SQV2

−

8.1 /SQV3

−

8.1

/SQC

−

9.1 dBV

(8)

Frequency Response

Record simulated 150 Hz

reference data for each channel 1,2,3 and 4.

Record simulated 1000 Hz

reference data for each channel 1,2,3 and 4.

Record simulated 3500 Hz

reference data for each channel 1,2,3 and 4.

Record simulated 5000 Hz

reference data for channel 4.

Record simulated 6000 Hz

reference data for channel 4.

Verify amplitude all within 6 dB.

Example report message(s):

08:06:28 Frequency Resp 150 Hz 0.5 ref Results = HQ1 3.6 /HQ2 3.8 /HQ3 3.5
/HQC 1.4 /SQV1 3.9 /SQV2 3.9 /SQV3 3.9 /SQC 3.9 dBV

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for 2100-1010-00















































































































































































































































































































































Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands

L3 2100-1010-00, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands