L3 2100-1010-00 Component Maintenance Manual With Illustrated Parts List Download Page 185

Page: 185 / 334

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Rev. 15 Page 136

Apr. 14/16

Testing & Fault Isolation

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

(7)

Connect the DIN CABLE from the speakers to the middle Speaker Out (SPKRS
OUT (J6)) connector on the front panel of the RIU.

(8)

After all connections are made to the RIU, apply power to the RIU. This can be
either 28 Vdc or 115 Vac, 400 Hz.

(9)

Apply power to the PC; the ROC and observe that the PC boots to the Win-
dows desktop.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for 2100-1010-00















































































































































































































































































































































Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands

L3 2100-1010-00, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands