L3 2100-1010-00 Component Maintenance Manual With Illustrated Parts List Download

Page: 18 / 334

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Highlights

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

Rev. 15 Page xviii

Apr. 14/16

HIGHLIGHTS

REVISION 07 DATED DECEMBER 01, 2008

Pages which have been added or revised are outlined below, together with the highlights
of Revision 07, dated December 01, 2008

Section

Page

Description

Title

−

Updated for Revision.

List of FSB’s

Added SB011, SB012, SB013, SB014, SB015, SB 016.

Front Matter

xix

−

xxii

xxii, xxxvi

Changed the List of Effective Pages to reflect the Revision 07, added
divider to Table of Contents.

Introduction

1, 5, 6

Added p/n: 2100

−

1026

−

02. Added reference to ROC/6, updated date

for Autotest confirmation.

Description &
Operation

−

4, 10, 12, 13,

15, 16 19, 20,
22, 23, 27

−

29,

−

35, 41,

−

47,49

−

Added Beacon Test note, changed content per SB013, corrected ref-
erence to Data Link (ATC) Interface. Added RIPs monitoring status
and p/n: 2100

−

1026

−

02. Removed p/n: 2100

−

1020

−

91/93.

Testing & Fault
Isolation

105

−

107, 114,

126, 131, 137,
148, 150

Added Beacon Test note, added Acquisition Processor configuration,
added reference to ROC/6. Updated Software Checksums. Added
p/n: 2100

−

1026

−

02. Removed p/n: 2100

−

1020

−

91/93

Automatic
Testing

201, 203, 205,
216

Updated part numbers, corrected test setup diagram, added RIU
power cautions, verified ROC/6 part list. Revised the Auto testing pro-
cedure to separate tests using DC, AC or DC and AC power.

Disassembly

305, 308, 309

Added new Capacitor bracket configuration and new part. Removed
p/n: 2100

−

1020

−

91/93.

Assembly

705

−

707, 709,

711

Added new Capacitor bracket configuration and new parts. Removed
p/n: 2100

−

1020

−

91/93.

Fit and Clear-
ances

Removed p/n: 2100

−

1020

−

93 in Audio output.

Special Tools
and Test Equip-
ment

902

−

904, 913,

926, 932

Updated Test Equipment lists, corrected test diagram. Added new
CVR download Cable p/n: 17TES0078.

Illustrated Parts
List and Schem-
atic Diagrams

1004

−

1012,

1014

−

1018,

1020

Updated Numerical Parts Index to reflect changes in service bulletins
and added new CVR p/n: 2100

−

1026

−

02. Removed p/n:

2100

−

1020

−

91/93.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for 2100-1010-00















































































































































































































































































































































Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands

L3 2100-1010-00, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands