L3 2100-1010-00 Component Maintenance Manual With Illustrated Parts List Download

Page: 188 / 334

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

FA2100CVR

Rev. 15 Page 139

Apr. 14/16

Testing & Fault Isolation

23–70–04

Use or disclosure of information on this sheet is subject

to the restrictions on the cover page of this document.

READ

−

OUT CENTER/7 (ROC/7)

−

Sound Card Setup

(1)

Double

−

click the CVDR Test icon on the ROC to start the software. The applic-

ation will launch with the Channels control screen displayed, as illustrated in
Figure 136.

Figure 136. CATS, Channels Control Screen

(2)

In the Channels control screen, click OK. The Channels control screen will dis-
appear.

(3)

Click the Volume control icon (it is the icon that looks like a speaker). The
Volume Mixer

−

Speakers (SB Audigy) control displays, see Figure 137.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for 2100-1010-00















































































































































































































































































































































Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands

L3 2100-1010-00, Component Maintenance Manual With Illustrated Parts List

Search results

Summary of Contents for 2100-1010-00

Reviews:

Related manuals for 2100-1010-00

Brands by name

Popular brands