COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 905
Apr. 14/16
Special Tools and Test Equipment
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
2.
GROUND SUPPORT EQUIPMENT (GSE) DESCRIPTIONS
A.
Portable Interface Unit, p/n: 17TES0043
Refer to Figure 901 and Figure 902. The Portable Interface (PI) Unit, Part Number
17TES0043, can be used to check the recorder status and download FA2100CVR
audio data from the recorder to the PI Memory Module, Part Number 17TES0053,
while installed in the aircraft. On the bench, the PI Unit can also be used to monitor
audio channels, playback audio data, check the recorder status, clear latch faults
and fault history logs. For these procedures, refer to the Portable Interface Unit Op-
erating Manual p/n: 165E1630-00.
B.
FA2100 Software Upload Cable Assembly & Distribution Diskettes
In the event that the Acquisition Processor PWA, p/n: 205E1591-00, p/n
205E1931-00 or p/n: 205E2502-10/-11, requires replacement, the FA2100CVR pro-
gram software must be loaded into the new board using the FA2100 Software
Upload cable assembly, p/n: 17TES0058, the FA2100 Software Utility Bundle Pro-
gram, p/n: 883E1894
−
01 which contains the CICCLDR and CICCIFC executable
files. The Utility Programs are also found on the ROSE Distribution CD, p/n:
17TES0321. The Software Upload cable assembly is connected between the
FA2100 front panel GSE/ATE connector and the Computer Interface and Commu-
nications Cable (CICC or CICC/2) cable to an enhanced parallel port of a PC.
For the the procedure to install the Software Upload Utility and CICC Interface Pro-
grams into the ROC/5 or ROC/6 Ground Station, and the procedure to upload the
FA2100 Software into the recorder, refer to Test and Troubleshooting Section, 100,
Paragraph 10.
The document reference is online, please check the correspondence between the online documentation and the printed version.
