KYOWA MRS-100 Series, Instruction Manual

Page: 27 / 81

26
When removing the Adapter from the transmitter, after removing the small screw (M2), pull out the
Adapter straight.
Be careful when handling the transmitter pins, as they can bend easily.
If the Adapter is difficult to pull out, insert a flat tool, such as a screwdriver blade, between the
transmitter and Adapter and gradually separate both sides, one after the other.
●
In using the MRS-104A-S
●
In using MRS-101A-S/-SE/-V
MEMO
If difficult to pull out,
insert a screwdriver
blade and gradually
separate both sides.
Screwdriver blade or similar tool
Pull out straight
Pull out straight
Pull out straight
Pull out straight
If difficult to pull out,
insert a screwdriver
blade and gradually
separate both sides.
Screwdriver blade
or similar tool
If the pins become bent, use tweezers or similar tool to straighten them before use.
Be careful, because inserting the Adapter when the pins are bent may damage the transmitter pins.
NOTE