KYOWA MRS-100 Series, Instruction Manual

Page: 14 / 81

13
f) "DATA" LED
Indicates the wireless communication status.
• Lights up in green for normal wireless communication.
Remains lit in green while in Measuring Mode during normal wireless communication.
• Lights up in red for three seconds if a wireless communication error occurs even in a single packet.
g) "LOCK" LED
Lights up in green when the product enters Measuring Mode. (Measuring Mode begins when the "START" switch
is pressed and the "START" LED is lit.)
In Measuring Mode, no switches other than "STOP" and "MUTE" are available.
h) "Transmitter’s battery voltage checking" LED
Indicates the transmitter power supply level in four levels by lighting up zero to three of the LEDs.
For more information, refer to "6. Transmitter power supply."
LED illumination settings can be changed using the Setting Software.
For instructions, refer to the MRS-10B instruction manual.
LED Display Power Level
●●●
High
↑
↓
Low
●● ●
● ●●
●●●
i) "RSSI( Received Signal Strength Indicator )" LED
Indicates RSSI from the transmitter in four levels by lighting up zero to three of the LEDs.
Serves as a guideline when finding the best place for installation.
For stable wireless communication, choose an installation location where three "RSSI" LEDs are lit.
The receiver receives data via both "MAIN" and "SUB" antennas but prioritizes data received from the "MAIN"
antenna.
"ANTENNA SUB" data is used in case a wireless communication error occurs in the "ANTENNA MAIN" data to
reduce the data defect rate.
LED
Display
Description RSSI
This is the recommended level.
Strong
↑
↓
Weak
Try to install the product in a different location with a better wireless signal.
Environments susceptible to wireless communication errors. Install the
product in a different location.
Environments where connecting to wireless communication is difficult. Install
the product in a different location.
●Packetizing measurement data
The transmitter groups sampled measurement data into packets, each of which contains a certain
quantity of data, and sends them intermittently by wireless communication.
MEMO