Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 144

Page: 144 / 189

8-4

Fax Settings > Default fax settings

Report

Print reports to check the machine settings and status, or set various reports for checking the results of sending and
receiving.

Report Print

Admin Rpt Set.

Result Rpt Set.

Item

Description

Status Page

A status page provides the current status of machine. FAX-related information includes the
Local FAX Number, Local FAX Name, fax line setting, etc. You can print it out as necessary.

Status Page (page 7-8)

Item

Description

Outgoing FAX Rpt

An activity report is printed out automatically after every 50 faxes sent.

Value

: Off, On

Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-7)

Incoming FAX Rpt

An activity report is printed out automatically after every 50 faxes received.

Value

: Off, On

Activity Report (Outgoing FAX Report and Incoming FAX Report) (page 7-7)

Item

Description

Send Result

Each time you send a fax, you can print a report to confirm whether the fax was sent
successfully.

Send Result Reports (page 7-4)

FAX RX Result

When a fax is received, you can be notified by receipt result report or e-mail.

FAX RX Result Reports (page 7-6)

Job Finish Notice

Attaches sent images to job finish notices.

Value

: Do Not Attach, Attach SendImage

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands