Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 113

Page: 113 / 189

6-14

Sending Faxes from PC > Basic Transmission

(4) Sender Information Tab

Enter your own information into fields explained below to send a cover page with your
faxes.

Item

Description

Company

A maximum of 64 characters can be entered.

Department

A maximum of 64 characters can be entered.

Name

A maximum of 32 characters can be entered.

Telephone Number

A maximum of 20 characters can be entered. (Entry is allowed for
the characters 0 to 9, #, *, -, (, ), +, and spaces.)

FAX Number

A maximum of 20 characters can be entered. (Entry is allowed for
the characters 0 to 9, #, *, -, (, ), +, and spaces.)

E-Mail Address

A maximum of 128 characters can be entered.
Available characters:
Symbols ( !, #, $, %, &, ’, *, +, -, ., /, =, @, [, ], ^, _, `, { and })
Alphanumerics (0 – 9, A – Z and a – z)

NOTE

Entering the e-mail address makes it possible to receive the transmission results report
by e-mail. The fax machine must be set to transmit e-mail.

Machine’s

Operation Guide

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Kyocera Triumph-Adler P-C2155w, Operation Manual, Page: 113 / 189

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews: