Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 82

Page: 82 / 189

5-18

Using Convenient Fax Functions > Polling Communication

Using Polling Transmission

Select the [Document Box/USB] key.

Place the originals.

Display the screen.

[

▲

] [

▼

] key > [

Polling Box

] > [

] key > [

Store File

] > [

] key

Select the type of originals, scanning density, etc., as necessary.

Select the [

Function Menu

] key.

It is possible to set the following functions. Select the [

] key when the setting is

complete.

For each of the functions, refer to the following:

Start storing.

Press the [

Start

] key. The originals are scanned and stored in the Polling box.

Cancelling Polling Transmissions

To cancel a polling transmission, delete the polling transmission original saved in the polling
box. For information on how to delete the saved original, refer to the following:

Function

Description

Original Size

Select the size of originals to be scanned.

Original Image

Select original image type.

Scan Resolution

Set the resolution at which to scan originals.

Orig. Orientation

Select the orientation of the original document top edge to
scan correct direction.

Continuous Scan

Scan a large number of originals separately and then
produce as one job.

File Name Entry

Allows you to rename the files created from scanned
originals.

Job Finish Notice

Sends a notice by an e-mail when a transmission is
complete.

Density

Adjust density.

Skip Blank Page

When there are blank pages in a scanned document, this
function skips the blank pages and prints only pages that
are not blank.

Sending Faxes (page 3-1)

Machine’s

Operation Guide

Deleting Originals in a Polling Box (page 5-22)

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands