Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 145

Page: 145 / 189

8-5

Fax Settings > Default fax settings

Common Settings

Configures overall machine operation.

Sound

Orig./Paper Set. (Original/Paper Settings)

Cassette 1 (2) Set. (Cassette 1 (2) Settings)

Select paper size and media type for Cassettes 1 (2).

MP Tray Set. (Multi Purpose Tray Settings)

Select paper size and media type for the multi purpose tray.

Item

Description

Buzzer

Set options for buzzer sound during the machine operations.

Job Finish

Emit a sound when a job is normally completed.

Value

: Off, On, FAX Reception Only

FAX Speaker

Adjust the volume of the speaker.
Speaker Volume: Volume of the built-in speaker when the line is connected by selecting [

Hook

] key.

Value

: 0 Mute, 1 Minimum, 2, 3 Medium, 4, 5 Maximum

FAX Monitor

Adjust the volume of the monitor.
Monitor Volume: Volume of the built-in speaker when the line is connected without selecting
[

On Hook

] key such as in memory transmission.

Value

: 0 Mute, 1 Minimum, 2, 3 Medium, 4, 5 Maximum

Item

Description

Cassette 1 (2) Size

Set the paper size to load in Cassette 1 and optional paper feeder (Cassette 2).

IMPORTANT

The following paper sizes can be used for fax reception.
Inch models: Letter, Legal, Statement-R
Metric models: A4, B5, A5-R, A5, Folio

Cassette 1 (2) Type

Set the media type to load in Cassette 1 and optional paper feeder (Cassette 2).

Value

: Plain (60 to 105 g/m

), Rough, Recycled, Preprinted

, Bond, Color, Prepunched*, Letterhead*,

Thick (106 to 163 g/m

), High Quality, Custom 1 to 8

Cannot be used to print received faxes.

Item

Description

MP Tray Size

Set the paper size for multi purpose tray.

IMPORTANT

The following paper sizes can be used for fax reception.
Inch models: Letter, Legal, Statement-R, Statement
Metric models: A4, B5, A5-R, A5, Folio

MP Tray Type

Set the media type for multi purpose tray.

Value

: Plain (60 to 105 g/m

), Transparency*, Rough, Vellum (60 to 220 g/m

), Labels, Recycled,

Preprinted*, Bond, Cardstock, Color, Prepunched*, Letterhead*, Envelope, Thick (106 to 220 g/m

Coated, High Quality, Custom 1 to 8

Cannot be used to print received faxes.

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands