Kyocera Triumph-Adler P-C2155w Operation Manual Download Page 140

Page: 140 / 189

7-11

Managing Jobs > Confirmation Screen of Destinations

Confirmation Screen of Destinations

When selecting [

] for [

Check beforeSend

], the confirmation screen of destinations appears after pressing the [

Start

]

key.

Machine’s

Operation Guide

Follow the steps below to confirm the destinations.

Check all destinations.

Select [

▲

] [

▼

] key, and confirm every destination.

Check the details of the destinations.

Use the following operations to check the details of the destinations.

Select the destination to check the details of.

[

] key > [

Detail

] > [

] key

The details of the destination are displayed. When the check has been completed, select
the [

] key.

Change a destination.

Delete a destination

Select the destination you want to delete.

[

] key > [

Delete

] > [

] key > [

Yes

]

The destination is deleted.

Add a destination

To add the destination, select [

Cancel

] and then return to the destination screen.

Select [Next].

When you have finished checking all destinations, select [

Next

Press the [Start] key.

Start sending.

NOTE

Always display all of the destinations and check them. The transmission is not possible
unless all the destinations are displayed.

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands

Kyocera Triumph-Adler P-C2155w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-C2155w

Reviews:

Related manuals for Triumph-Adler P-C2155w

Brands by name

Popular brands