manualshive.com logo in svg

Kyocera Triumph-Adler P-C2155w, Operation Manual

The Kyocera Triumph-Adler P-C2155w Operation Manual is a comprehensive guide that empowers users to maximize the potential of their printer. Available for free download at manualshive.com, this manual provides step-by-step instructions and essential tips to ensure smooth operation and facilitate seamless printing experiences.

Share
Download
background image

9-7

Troubleshooting > Error Code List

E01600

Communication error occurred during reception of high-speed transmission. Ask the sender to reduce 
the transmission speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of RX Start Speed in System 
Menu.

E01700 - E01720

Communication error occurred during high-speed transmission. Send again.
If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in System 
Menu.

E01721

Communication error occurred during high-speed transmission. Designated transmission speed may 
not be available for the recipient machine.
Reduce the transmission start speed and send again.

E01800 -E01820

Communication error occurred during reception of high-speed transmission. Ask the sender to reduce 
the transmission speed and send again or reduce the RX Start Speed in System Menu.

E01821

Communication error occurred during reception of high-speed transmission. Designated transmission 
speed may not be available for this machine. Ask the sender to reduce the transmission speed and 
send again or reduce the RX Start Speed in System Menu.

E03000
U03000

During polling reception, a fax could not be received because no originals were set in the other party’s 
fax machine. Check with the other party.

E03200
U03200

Sub address bulletin board reception was attempted and the other party’s machine is an our brand 
model, but the specified sub address box contained no data. Check with the other party.

E03300
U03300

An error occurred due to either 1 or 2 below.
Check with the other party.
1 The other party’s machine is an our-brand model and transmission restrictions were found set by 

the other party during polling reception. Communication was interrupted because the password was 
incorrect.

2 The other party’s machine is an our-brand model and transmission restrictions were found set by 

the other party during sub address bulletin board reception.
Communication was interrupted because the password was incorrect.

E03400
U03400

Polling reception was interrupted because the Polling ID entered by the other party did not match the 
Local FAX ID on the receiving machine. Check with the other party.

E03500
U03500

Sub address bulletin board reception was attempted and the other party’s machine is an our brand 
model, but the specified sub address box was not registered on the other party’s machine.
Check with the recipient.

E03600
U03600

The other party’s machine is an our-brand model and sub address bulletin board reception was 
interrupted because the specified sub address password was incorrect. Check with the other party.

E03700
U03700

Sub address bulletin board reception was attempted but the other party’s machine either does not 
have a sub address bulletin board communication function or there were no originals in any of the 
originals transfer boxes (sub address boxes).

E04000
U04000

Specified sub address box is not registered in our brand recipient machine, or the sub address does 
not match.

E04100
U04100

Recipient machine is not equipped with a sub address box function, or the sub address does not 
match.

E04200
U04200

Encrypted transmission was canceled because the specified box is not registered.

E04300
U04300

Encrypted transmission was canceled because the recipient fax is not equipped with an encrypted 
communication function.

E04400
U04400

Encrypted transmission was canceled because the encryption key does not match.

Error Code

Possible Cause/Action

Summary of Contents for Triumph-Adler P-C2155w






























































































































































































Reviews:

No comments

Related manuals for Triumph-Adler P-C2155w

Magicard Rio Pro Getting Started Manual preview
Rio Pro
Brand: Magicard Pages: 30
Magicard Rio Pro User Manual preview
Rio Pro
Brand: Magicard Pages: 35
Magicard MAGICARD ID Card Printer Driver Manual preview
MAGICARD ID Card Printer
Brand: Magicard Pages: 30
Magicard Rio 2e Brochure preview
Rio 2e
Brand: Magicard Pages: 6
TallyGenicom T6212 Operator'S Manual preview
T6212
Brand: TallyGenicom Pages: 92
TASKalfa 306ci First Steps preview
306ci
Brand: TASKalfa Pages: 36
TallyGenicom LA800 Quick Start Manual preview
LA800
Brand: TallyGenicom Pages: 166
Canon PIXMA MX522 Setup Manual preview
PIXMA MX522
Brand: Canon Pages: 30
Oki MICROLINE 720 Handbook preview
MICROLINE 720
Brand: Oki Pages: 120
Pantum P3020 Series User Manual preview
P3020 Series
Brand: Pantum Pages: 95
Sam4s GIANT-100 User Manual preview
GIANT-100
Brand: Sam4s Pages: 24
Canon imageCLASS LBP913w User Manual preview
imageCLASS LBP913w
Brand: Canon Pages: 327
Epson C11C501061 - Stylus Photo 900 Color Inkjet Printer Product Information Manual preview
C11C501061 - Stylus Photo 900 Color Inkjet Printer
Brand: Epson Pages: 15
Epson C11C498001 - Stylus Photo 825 Inkjet Printer Product Information preview
C11C498001 - Stylus Photo 825 Inkjet Printer
Brand: Epson Pages: 10
Epson C11C616001 - Stylus C68 Color Inkjet Printer Quick Manual preview
C11C616001 - Stylus C68 Color Inkjet Printer
Brand: Epson Pages: 44
Epson C11C546011-N - Stylus Photo R200 Printer Basics Manual preview
C11C546011-N - Stylus Photo R200
Brand: Epson Pages: 88
Epson C11C560111 - PLQ 20 B/W Dot-matrix Printer User Manual preview
C11C560111 - PLQ 20 B/W Dot-matrix Printer
Brand: Epson Pages: 114
Epson C11C605001 - DFX 9000 B/W Dot-matrix Printer Service Manual preview
C11C605001 - DFX 9000 B/W Dot-matrix Printer
Brand: Epson Pages: 161

Brands by name

Popular brands

Load more brands