2-13
Before Using the Fax Machine > Registering Destinations in the Address Book
5
Enter the fax number.
1
[
◄
] [
►
] key > [
FAX Number
] > [
Edit
]
2
Enter the fax number.
6
Select transmission settings.
Sub address communication, encrypted transmission, transmission start speed and ECM can
be set.
1
Select [
Detail
].
2
Select the item to change the settings for and then select [
Edit
] or [
Change
].
3
[
OK
] key > [
OK
] key
7
Enter the address number.
1
[
◄
] [
►
] key > [
Address Number
] > [
Edit
]
2
Enter the address number.
3
Select the [
OK
] key.
NOTE
Up to 32 characters can be entered.
Use the numeric keys to enter a number.
Selecting the [
Address Recall/Pause
] key adds about three seconds of waiting time
during dialing. For example, when dialing the receiving system on an external line, you can
use this method to insert a pause before resuming dialing after you dial a specific number.
Item
Description
Sub Address
Set this to transmit using a Sub Address.
Sub Address Transmission (page 5-16)
Encrypted TX
This is set when using encrypted transmission to send the data.
Using the Encrypted Transmission (page 5-25)
TX Start Speed
This is set to change the transmission start speed. Select the speed from
33,600 bps, 14,400 bps, and 9,600 bps.
NOTE
Normally the default setting should be used.
ECM
ECM is a communication mode specified by the ITU-T (International
Telecommunication Union) that retransmits data when an error occurs. Fax
machines that have ECM mode check for errors as they communicate,
preventing distortion of the image due to noise on the line and other conditions.
NOTE
You can set any value between 1 and 120.
Select the [
▲
] or [
▼
] key or the numeric keys to enter a number.
Address Number is an ID for a destination. You can select any available number for groups.
If you specify an address number that is already in use, an error message appears when
you select the [
OK
] key and the number cannot be registered.
