Kyocera TASKalfa 181, Operation Manual

Page: 264 / 276

Appendix-26 OPERATION GUIDE
the minimum. The default setting of the preset time is 1 minutes. You can use the operation panel to change this
time.
SNMP (Simple Network Management Protocol)
This is a protocol for monitoring and controlling communication equipment connected to a network such as
routers, computers, and terminals through the network that uses TCP/IP (Transmission Control Protocol/Internet
Protocol).
Status Page
The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper
source settings.
Subnet Mask
The subnet mask is a way of augmenting the network address section of an IP address. A subnet mask
represents all network address sections as 1 and all host address sections as 0. The number of bits in the prefix
indicates the length of the network address. The term "prefix" refers to something added to the beginning and,
in this context, indicates the first section of the IP address. When an IP address is written, the length of the
network address can indicated by the prefix length after a forward slash (/). For example, "24" in the address
"133.210.2.0/24". In this way, "133.210.2.0/24" denotes the IP address "133.210.2.0" with a 24-bit prefix
(network section). This new network address section (originally part of the host address) made possible by the
subnet mask is referred to as the subnet address.When you enter the subnet mask, be sure to set the
DHCP
setting to Off .
TCP/IP (Transmission Control Protocol/Internet Protocol)
TCP/IP is a suite of protocols designed to define the way computers and other devices communicate with each
other over a network.
USB (Universal Serial Bus)2.0
A USB interface standard for Hi-Speed USB 2.0. The maximum transfer rate is 480 Mbps. This machine is
equipped with USB 2.0 for high-speed data transfer.