Kyocera TASKalfa 181 Operation Manual Download Page 233

Page: 233 / 276

Troubleshooting

OPERATION GUIDE

9-19

Paper Output Slot

Paper misfeed in Eject section Remove paper

appears and the jam location indicator shown in

the illustration blinks, a paper jam has occurred in the paper output slot. Follow the steps below to clear paper
jams in the paper output slot.

IMPORTANT:

The drum section inside the main body is sensitive to scratches and contaminants. When

removing paper, be careful not to touch it or scratch it with your watch, ring, etc.

If jammed paper is seen through the paper output
slot, pull it out to remove it.

NOTE:

If the paper does happen to tear, remove any

loose scraps from inside the machine.

Pull the left cover handle up to open the left cover.

Remove the jammed paper without tearing it.

NOTE:

If the paper does happen to tear, remove any

loose scraps from inside the machine.

Close the left cover.

Paper misfeed in

Eject Section

JAM50

Remove paper .

Summary of Contents for TASKalfa 181





















































































































































































































































































Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands

Kyocera TASKalfa 181, Operation Manual

Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands