Kyocera TASKalfa 181, Operation Manual

Page: 210 / 276

Maintenance
8-6 OPERATION GUIDE
Toner Container and Waste Toner Box Replacement
When the touch panel displays Add toner , replace the toner.
Every time you replace the toner container, be sure to clean the parts as instructed below. Dirty parts may
deteriorate output quality.
CAUTION:
Do not attempt to incinerate the toner container or the waste toner box. Dangerous sparks
may cause burns.
IMPORTANT: During toner container replacement, temporarily move storage media and computer supplies
(such as floppy disks) away from the toner container. This is to avoid damaging media by the magnetism of
toner.
We are not liable against any damages or problems arising from the use of toner containers other than those
designated as original toner containers. For optimum performance, it is also recommended to use only the
original toner containers which are specifically intended for use in your country or region. If the toner container
for another destinations is installed, the printer will stop printing.
NOTE:
Information Collection on Memory Chips - The memory chip attached to the toner container is
designed to improve convenience for the end user; to support the recycling operation of empty toner
containers; and to gather information to support new product planning and development. The information
gathered is anonymous - it cannot be associated to any specific individual and the data is intended to be used
anonymously.
Removing Waste Toner Box and Toner Container
1
Open the front cover.
2
While pushing the waste toner box holder to the
left, remove the waste toner box.