Kyocera TASKalfa 181 Operation Manual Download Page 218

Page: 218 / 276

Troubleshooting

9-4

OPERATION GUIDE

Printouts are
wrinkled.

Is the paper separator of the
paper feed unit dirty?

Clean the paper separator.

8-3

Is the paper damp?

Replace the paper with new paper.

2-14

Is the paper set in a proper
orientation?

Change the orientation in which the
paper is positioned.

—

Cannot print.

Is the machine plugged in?

Plug the power cord into an AC
outlet.

—

Is the machine powered on?

Turn on the main power switch.

3-2

Is the printer cable
connected?

Connect the correct printer cable
securely.

2-5

Was the machine powered
on before the printer cable
was connected?

Power on the machine after
connecting the printer cable.

3-2

Is the machine offline? (Is the
Ready indicator off?)

Press the

Print

key,

select

, and then press the Enter

key. The Ready indicator lights up.

—

Correct characters
are not printed.

Is a proper printer cable
connected?

Connect a shielded type printer
cable.

2-5

Documents are
printed improperly.

Are the application software
settings at the PC set
properly?

Check that the printer driver and
application software settings are
set properly.

—

While the operation
panel was being used,
the keys locked up
and do not respond
when pressed.

Is the operation panel
locked?

Check the panel lock setting in
COMMAND CENTER and change
the setting if necessary.

KYOCERA
COMMAND
CENTER
Operation
Guide

Symptom

Checkpoints

Corrective Actions

Reference

Page

Summary of Contents for TASKalfa 181





















































































































































































































































































Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands

Kyocera TASKalfa 181, Operation Manual

Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands