Kyocera TASKalfa 181, Operation Manual

Page: 40 / 276

Preparation before Use
2-8 OPERATION GUIDE
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the
header of the E-mail message. Set the date, time and time difference from GMT of the region where the machine
is used.
NOTE:
Be sure to set the time difference before setting the date and time.
1
After turning on the main power switch, press the
System Menu/Counter key.
2
Press U or V repeatedly until
Machine Default
appears, and press the Enter key.
3
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1800 for the 18 ppm model
and 2200 for the 22 ppm model.
NOTE:
The four-digit management code can be
changed. For details, refer to Administrator
Management Code Change on page 6-24 .
If the management code is accepted, the Machine
default screen is displayed.
NOTE:
The * (asterisk) at an item on each setting
screen indicates the current setting.
4
Press U or V to select
Date/Time
, and then press
the Enter key.
5
Press U or V to select
Time Zone
and then press
Y or Z to set the time difference.
6
Press U or V to select
Time
and then press Y or
Z to set the current time.
Job Accounting
System Menu / Counter:
Copy Default
Machine Default
Enter Pin Code using # key.
End
Auto Cassette SW
Machine Default :
Paper Size(1st)
On
Auto I
:
:
Date/Time:
Key Sound On /Off On :
Machine Default :
Low Power Time : 1 Min.
06:33 :
Time Zone
06:33
On
GMT
:
:
:
Time
Date/Time:
DST
00:00 +
End
Time
Date/Time:
DST
06:33
On
:
: