Kyocera TASKalfa 181, Operation Manual

Page: 166 / 276

System Menu
6-14 OPERATION GUIDE
NOTE:
The four-digit management code can be
changed. (See Administrator Management Code
Change on page 6-24 .)
4
If the management code is accepted, the Machine
Default screen is displayed.
Next, perform the setting referring to the following
description of each setting item.
NOTE:
The * (asterisk) at an item on each setting
screen indicates the current setting.
Auto Cassette Switching
This machine can continue copying by switching the cassette to another cassette that contains paper of the
same size and the same orientation as the current paper when paper runs out in the currently selected cassette.
To prohibit switching to a cassette that has a different paper type, select
On
/
Only same paper type
.
NOTE:
On the 18 ppm model, this item is displayed only if the optional paper feeder is installed.
1
Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13 .)
2
Press U or V to select
Auto Cassette SW
, and
then press the Enter key.
3
Press U or V to select
On/All types of paper
,
On/Only same paper type
, or
Off
, and then
press the Enter key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
Paper Size (cassettes 1 to 4)
Set the paper sizes of cassettes 1 to 4. To detect the paper size automatically, set
Auto Detection Metric
or
Auto Detection Inch
.
Sizes that can be set: 8
1/2
×
13", 8K, 16K
End
Auto Cassette SW
Machine Default :
Paper Size(1st)
On
Auto I
:
:
End
Auto Cassette SW
Machine Default :
Paper Size(1st)
On
Auto I
:
:
Automatic Cassette Switching :
Off
On/All types of paper
*
On/Only same paper type