Kyocera TASKalfa 181 Operation Manual Download Page 234

Page: 234 / 276

Troubleshooting

9-20

OPERATION GUIDE

Optional Document Processor

Misfeed in DP. Remove original(s)

appears and the jam location indicator shown in the illustration

blinks, a paper jam has occurred in the optional document processor. Perform the following procedure to remove
the jammed original(s).

Remove all of the originals remaining in the original
table.

Open the left cover.

Remove the jammed original without tearing it.

NOTE:

If the original does happen to tear, remove any

loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.

Raise the paper feed unit A.

Misfeed in DP .

Remove original (s).

JAM70

Summary of Contents for TASKalfa 181





















































































































































































































































































Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands

Kyocera TASKalfa 181, Operation Manual

Search results

Summary of Contents for TASKalfa 181

Reviews:

Related manuals for TASKalfa 181

Brands by name

Popular brands