Kyocera TASKalfa 181, Operation Manual

Page: 164 / 276

System Menu
6-12 OPERATION GUIDE
3
Enter the maximum number of copies (1 to 999)
using the numeric keys, and then press the
Enter
key.
4
Press the Reset key.
The message display returns to the copier basic
screen.
Black Streaking Reduction Processing
If black streaks (streaks that are not contained in the original image) appear on copies from the optional
document processor, you can make black streaking less noticeable. Since the black streaking reduction
processing reduces the reproducibility of fine characters, it is normally recommended to use the factory default
setting.
1
Display the Copy Default screen. (See How to
Display the Copy Default Screen on page 6-2 .)
2
Press U
or
V to select
Corr. Black line
, and
then press the Enter key.
3
Press U or V to select
None
,
Weak
or
Strong
, and
then press the Enter key.
NOTE:
To use the black streaking reduction
processing, first select
Weak
. If black streaking is not
reduced, select
Strong
.
4
Press the Reset key.
The message display returns to the copier basic
screen.
Sets
Copy Limit:
999
# keys
Corr. Black Line
Copy Limit
BorderEraseWidth
Copy Default :
1/4" :
999 : Set
None :
Correct. Fine black line :
None
Weak
*
Strong