Kyocera Mita KM-4530, Service Manual

Page: 237 / 384

2BC/D
1-6-33
Figure 1-6-64
Figure 1-6-65
(6-2) Adjusting the position of the ISU
Caution
Before making the following adjustment, output a 1 dot-LINE PG pattern in maintenance item U089 to use as the original
for the adjustment.
Procedure
Refit the contact glass.
Remove the contact glass and adjust
the lateral squareness of the ISU by
rotating the pin.
For copy example 1, rotate the pin in
the direction of the black arrow ( ).
For copy example 2, rotate the pin in
the direction of the white arrow ( ).
Yes
No
Press the start key and make
a test copy at 100% magnification.
Start
End
Is the image correct?
Place the original
on the contact glass.
Correct image
Copy
example 1
Copy
example 2
Pin