Kyocera Mita KM-4530, Service Manual, Page: 279 / 384

2BC/D-1
1-6-75
( 5-2) Adjusting the DF trailing edge registration
Procedure
Figure 1-6-128
Original Copy
example 1
Copy
example 2
Yes
No
Start
Enter maintenance mode.
Enter “071” using the numeric keys.
Press the start key.
Select “TRAIL EDGE ADJ”.
Press the interrupt key.
Place an original on the DF
and make a test copy.
Is the image correct?
Press the start key.
The new setting
is stored.
Setting range: –32 – +32
initial setting: –15
Changing the value by 1 moves
the trailing edge by 0.19 mm.
Increasing backward and decreasing it moves
the image forward.
For copy example 1, increase
the value using the cursor up key.
For copy example 2, decrease
the value using the cursor down key.
Press the stop/clear key to
exit maintenance mode.
End
1-6-71