Kyocera Mita KM-4530, Service Manual

Page: 378 / 384

2BC/D-1
2-4-20
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Feedshift and Duplex pressure release Check or replace Every service Replace after feeding 500,000
duplex sections solenoid sheets.
Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.
Bushes Check and grease Every service Check for unusual noise at the
roller section. If unusual noise
occurs, apply grease 1.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
DF section DF forwarding pulley Replace or clean Every 100,000 counts Clean with alcohol when visiting 1-6-67
the user.
DF feed pulley Replace or clean Every 100,000 counts Clean with alcohol when visiting 1-6-67
the user.
DF separation pulley Replace or clean Every 100,000 counts Clean with alcohol when visiting 1-6-67-1
the user.
DF registration roller Clean Every service Clean with alcohol or a dry cloth.
Front reading pulley Clean Every service Clean with alcohol or a dry cloth.
DF registration pulley Check or clean Every service Clean with alcohol or a dry cloth
if it is dirty.
Original feed switch Check or clean Every service Clean with airbrush or a dry cloth.
Lower original conveying Clean Every service Clean with alcohol or a dry cloth.
roller
Upper original conveying
Clean Every service Clean with alcohol or a dry cloth.
roller
Upper original conveying Check or clean Every service Clean with alcohol or a dry cloth
pulley if it is dirty.
Original conveying guide Clean Every service Clean with alcohol or a dry cloth.
Original conveying pulley Clean Every service Clean the opposite side of the DF
cover timing switch with alcohol or a dry
cloth.
Middle original conveying Clean Every 400,000 counts Clean with alcohol (Remove the
roller front, rear and right covers and
original conveying pulley mount
plate).
Middle original conveying Clean Every 400,000 counts Clean with alcohol (Remove the
pulley front, rear and right covers and
original conveying pulley mount
plate).
Eject pulley Check or clean Every service Clean with alcohol or a dry cloth
if it is dirty.
Original size length switch Clean Every service Clean with alcohol. Filter
Covers Clean Every service Clean with alcohol.
Original holder mat Clean Every service Clean with alcohol or a dry cloth.
Original holder sheet Clean Every service Clean with alcohol or a dry cloth.
Original size indicator Clean Every service Clean with alcohol or a dry cloth.
sponge
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Covers Covers Clean Every service Clean with alcohol or a dry cloth.
2-4-18