Kyocera Mita FS-9100DN, Operation Manual

Page: 143 / 145

Chapter 3 Printing Through Application Software
3-18
A unique number and barcode is automatically assigned to each
job as it is stored on the printer. The number appears when jobs
are listed in utilities such as
KM-NET Printer Disk Manager or
KM-NET VIEWER . The number is also printed, together with its
barcode, on the code Job List. The code Job List can be printed us-
ing the
list of Code Job
menu of the printer. Barcode printing
jobs will be displayed as code jobs on the printer operator panel.
The barcode and number can also be printed on the original doc-
ument that is printed when the job is stored on the hard disk. This
barcode can be printed on the first page as a code for the whole
document, or on every page, so that each individual page of the
document can be accessed with the barcode reader.
To print, proceed as follows.
Browse File > Print . The Print dialog box will be dis-
played.
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX .
Select the range of the pages you want to print in the
document,
All or Current page in Page range . To print
part of the document, check Pages , then enter page
numbers separated by commas.
Specify the number of copies you want to print in the
Number of copies combo box in Copies .
Click the Properties button. The Properties dialog box
is displayed. Click the Output tab and click the Job
Settings button.
The Job Settings dialog box will appear.
Check the Job Storage checkbox and then the Tem-
porary or Permanent radio button.
When using the option barcode reader, click the Op-
tion button.
The Job Storage Option dialogbox will appear
3.6.3 Using Code Job
1
2
3
4
5
6
6
7