Kyocera Mita FS-9100DN, Operation Manual

Page: 132 / 145

Chapter 3 Printing Through Application Software
3-7
DF-70 provides the staple function, while DF-71 provides the
punch function.
Browse File > Print . The Print dialog box will be dis-
played.
Click on the Name drop down list, all the printers in-
stalled under Windows are listed. Select Kyocera Mita
FS-9100DN KX or Kyocera Mita FS-9500DN KX .
Select the range of the pages you want to print in the
document,
All or Page range . To print part of the docu-
ment, check Pages , then enter page numbers separat-
ed by commas.
Specify the number of copies you want to print in the
Number of copies combo box in Copies .
Click the Properties button in the Print dialog box. The
Properties dialog box is displayed.
Click the Output tab.
Select Finisher [Face-down] or Finisher [Face-up]
as Output to drop down list, and click the OK button.
If you want to collate the output pages, check the
Collate box.
Finishing Options
Collate: sets whether the pages are collated or
not.
Reverse
Page Order: prints in the reverse page order.
Staple:
selects the staple position: Upper Left,
Upper Right or Booklet (stitching posi-
tion).
Offset: Outputs pages while shifting them alter-
nately for each document.
Punch: selects the hole punch type: 2-Hole, 3-
Hole or 4-Hole.
Click the OK button in the Properties dialog box. The
Print dialog box is displayed again.
Click the OK button to start printing.
3.4 Using the Document Finisher
(DF-70/DF-71)
1
3
2
4
2
3
4
5
6
7
8
9
10