Kyocera Mita Ecosys FS-1800, User Manual

Page: 58 / 249

Operating the Operator Panel
1-48
Printing a Network Card Status Page
You can have your printer print out a status page for the network interface
card each time the printer is started. The network interface card status
page shows the firmware version, the IP address, and other information
about the network interface card. The default setting is
On
(print).
1
Press the MENU key.
2
Press the
or
key and select.
Interface >
.
3
Press the ENTER key. The message display shows a blinking
question mark (
?
).
If you want to abandon the interface selection procedure, press the
CANCEL key. The interface remains unchanged.
4
Press the
or
key and select
Option
.
5
Press the ENTER key again. The message display indicates
>
.
6
Press the
>
key and then press
the
or
key
repeatedly until the
message display indicates
>Opt. StatusPage
.
Option
MENU
Interface
Parallel
ENTER
Interface
? Parallel
Interface
? Option
ENTER
Interface >
Option
?
>Opt. StatusPage
On