Kyocera Mita Ecosys FS-1800, User Manual

Page: 118 / 249

Operating the Operator Panel
1-108
Resetting the Remaining Toner Counter
If the toner container was replaced when
Replace toner Clean
Printer
was not displayed, reset the toner counter as follows so that
accurate toner gauge measurement is indicated on the status page. Note
that if this operation is performed when the toner cartridge is not replaced,
the toner gauge measurement will not be indicated correctly.
If the type of the toner kit (TK-60/TK-60E) was changed, the toner ID must
also be changed. See Setting the Toner ID on page 1-127 .
Also refer to the User's Manual supplied with the toner kit when
replacing the toner container.
1
Press the MENU key.
2
Press the
or
key and select
Life Counters >
.
3
Press the > key.
4
Press the
or
key to display
>New Toner Installed
.
5
Press the ENTER key. The message display indicates a question
mark (
?
).
6
Press the
ENTER
key. The replacement setting for the new toner
container starts.
7
Press the MENU key and the message display returns to
Ready
.
MENU
Life Counters >
?
>New Toner
Installed
ENTER
>New Toner
Installed ?
ENTER
MENU