Kyocera Mita Ecosys FS-1800, User Manual

Page: 170 / 249

General Guide
4-2
4.1 General Guide
If you still cannot correct a printer problem even after checking the above,
please contact your Kyocera Mita dealer.
Symptom Check Items Corrective Action
The printer will not
print from the
computer.
Check the
READY
indicator.
Off Look through the items below and check
anything that seems appropriate.
Flashing An error has occurred. For details on error
warnings and remedies, see section
4.3.1
Indicators on page 4-6 .
Lit See the appropriate item below.
Check the
ATTENTION
indicator.
Flashing See section
4.3.1 Indicators
on page
4-6
Lit
A maintenance message appears in the
message display.
See section 4.3.2 Maintenance Messages on
page 4-7
Print quality is not good. See section
4.2 Print Quality Problems
on
page 4-3 .
Paper is jammed. See section 4.4 Correcting a Paper Jam on
page 4-12 .
Nothing lights on the
operator panel even
when power is turned
on and the fan makes
no noise.
Check that the power cord is properly
plugged into the power outlet.
Turn off the printer's power, plug in the power
cord securely, and try turning on the printer's
power again.
Check that the power switch is really in the ON (
❘
) position.
The printer prints a
status page, but data
from the computer is
not being printed
normally.
Check the interface cable. Connect both ends of the interface cable
securely. Try replacing the printer cable. For
details on the parallel interface for this
printer, see Appendix C .
Check program files and application
software. Try printing another file or using another
print command. If the problem occurs only
with a specific file or application, check the
printer settings for that application.