Kyocera Mita Ecosys FS-1800, User Manual

Page: 57 / 249

Operating the Operator Panel
1-47
8
Press the
>
key. Each time
the
or
key
is pressed, the setting
item changes as shown below.
9
Display the setting item to be set and press the
ENTER
key. For
DHCP, the message display indicates a question mark (
?
). For IP
Address, Subnet Mask, and Gateway, the cursor ( ) blinks.
10
For DHCP, each time the
or
key is pressed, the message
display changes between
On
and
Off
. For IP Address, Subnet Mask,
and Gateway addresses, pressing
or
key changes the numbers
(000 to 255) where the cursor is blinking. You can use the <
or
> key
to move the cursor back and forth through the figures to rapidly set a
large number.
If you enter the wrong number, clear it by pressing the CANCEL key,
then enter the correct number again.
11
Press the ENTER key.
12
Press the MENU key and the message display returns to
Ready
.
?
>>DHCP
Off
>>IP Address
000.000.000.000
>>Subnet Mask
000.000.000.000
>>Gateway
000.000.000.000
ENTER
ENTER
MENU