Kyocera Mita Ecosys FS-1800, User Manual

Page: 107 / 249

Operating the Operator Panel
1-97
3
Press the > key.
4
Press the
or
key to display
>Duplex mode >
.
5
Press the ENTER key. The message display shows a blinking
question mark (
?
).
6
Each time the
or
key is pressed, the duplex mode changes as
shown below.
None
(default)
Short edge bind
Long edge bind
7
When the desired duplex mode displayed, Press the
ENTER
key.
8
Press the MENU key and the message display returns to
Ready
.
Duplex Printing from the MP tray
In first mode, be sure to set the MP tray to the same paper size and paper
type as set for the current cassette. If the paper size or type differs, a paper
jam may result. Also note that it is not possible to select the MP tray as the
current cassette and perform duplex printing. We therefore recommend
that duplex printing be performed from the paper cassette.
?
>Duplex mode >
None
ENTER
>Duplex mode >
? None
ENTER
MENU