Kyocera Mita Ecosys FS-1800, User Manual

Page: 120 / 249

Operating the Operator Panel
1-110
Automatic Form Feed Timeout Setting
When the printer receives no data for a certain time, it time out and
releases the current interface: it prints whatever data it has in its buffer
and feeds out the page. You can adjust the time-out time as follows:
1
Press the MENU key.
2
Press the
or
key and select
Others >
.
3
Press the > key.
4
Press the
or
key to display
>Form Feed Time
.
The default setting is 30 seconds.
5
Press the ENTER key, the message display shows a blinking cursor
( ).
6
Pressing the
or
key will increase or decrease the value of the
figure where the cursor is blinking. The time must be set in the
range of
0
to
495
seconds, in 5-second increments. You can use the <
and > keys to move the cursor back and forth through the figures to
rapidly set a large number.
If you want to abandon the setting procedure, press the CANCEL
key.
7
Display the desired time and press the
ENTER
key.
8
Press the MENU key and the message display returns to
Ready
.
Form Feed
Time Out
MENU
Others >
?
>Form Feed
Time Out 030sec.
ENTER
>Form Feed Time.
Time Out 030sec.
ENTER
MENU