KYMCO MXU 700i Page 16 Owner'S Manual Download

Page: 16 / 164



Always be careful when skidding or sliding. Learn to safely control skidding or sliding by practicing at

low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be

very cautious in order to reduce the chance of skidding or sliding out of control.



Never operate an ATV in fast flowing water or in water that deeper than recommended in this manual.

Remember that wet brakes may have reduced stopping ability. Test your brakes after leaving water. If

necessary, apply them several times to let friction dry out the linings.



Always use the size and type tires specified in this manual. Always maintain proper tire pressure as

described in this manual.



Never modify an ATV through improper installation or use of accessories.



Never exceed the stated load capacity for an ATV. Cargo should be properly distributed and securely

attached. Reduce speed and follow instructions in this manual for carrying cargo. Allow greater

distance for braking.

Summary of Contents for MXU 700i





































































































































































Search results

Summary of Contents for MXU 700i

Reviews:

Related manuals for MXU 700i

Brands by name

Popular brands

KYMCO MXU 700i, Owner'S Manual

Search results

Summary of Contents for MXU 700i

Reviews:

Related manuals for MXU 700i

Brands by name

Popular brands