KYMCO MXU 700i, Owner'S Manual

Page: 144 / 164

8.20.1. Battery remove
1. Make sure the ignition switch is OFF.
2. Remove the seat (CH 4.20)
3. Release the rings and remove the rubber band
(1).
4. Disconnect the negative (-) terminal lead (2)
from the battery first, and then disconnect the
positive (+) terminal lead (3).
5. Remove the battery.
8.20.2. Battery installation
1. Install in the reverse order of removal.
2. After installing the battery, check to see if the
battery cables are routed correctly.
NOTE:
First connect the positive (+) cable and then
negative (-) cable to avoid short circuit.
(1) Rubber band
(2) Negative terminal lead
(3) Positive terminal lead
136