KYMCO MXU 700i, Owner'S Manual

Page: 29 / 164

(11) Coolant Temperature Gauge
When the coolant temperature reaches a
specified level to H position, this gauge comes
on to warn that the coolant temperature is too
hot. If the indicator comes on during operation,
stop the engine as soon as it is safe to do so
and allow the engine to cool down for about 10
minutes.
(12) Coolant Temperature Gauge
When the coolant temperature reaches a
specified level to H position, this gauge comes
on to warn that the coolant temperature is too
hot. If the indicator comes on during operation,
stop the engine as soon as it is safe to do so
and allow the engine to cool down for about 10
minutes.
(13) EPS Warning Indicator Light*
The EPS warning light will momentarily
illuminate when the engine starts, then goes off
in one second if the system is in order. If the
warning light illuminates any other time, it
indicates the ECU or actuator has
malfunctioned, or the wiring harness has
become disconnected. Stop driving
immediately and see an authorized KYMCO
dealer to have the system checked
* EPS MODLE ONLY
21