KYMCO MXU 700i, Owner'S Manual

Page: 137 / 164

8.15. COOLING SYSTEM INSPECTION
Place the machine on the level ground.
Remove the two fasteners (1) and then remove front
cover.
(1) Fasteners
Check the coolant level in the coolant reservoir
when the engine is cold as the coolant level will vary
with engine temperature. The coolant level should
be between the maximum and minimum marks.
If the level is low, remove the coolant reservoir cap,
and then add coolant or distilled water to raise it to
the specified level.
If your ATV overheats, see CH 8.17 for details.
CAUTION:
Hard water or salt water is harmful to the engine.
You may use distilled water if you can not get soft
water.
CAUTION:
Recommended Coolant Solution
Coolant Mixture Ratio:
Water 50%:Antifreeze 50%(1:1)
129