KYMCO MXU 700i Owner'S Manual Download Page 162

Page: 162 / 164

9.4. NOISE REGULATION

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED:

Some local laws and regulations prohibit the following acts or the causing thereof: (1) The removal or

rendering inoperative by any person other than for purposes of maintenance, repair, or replacement of any

device or element of design incorporated into any new vehicle for the purpose of noise control prior to its

sale or delivery to the ultimate purchaser or while it is in use or (2) the use of the vehicle after such device or

element of design has been removed or rendered inoperative by any person.

"AMONG THOSE ACTS PRESUMED TO CONSTITUTE TAMPERING ARE THE ACTS LISTED BELOW".

Exhaust system

Muffler

Exhaust pipe

Silencer

Intake system

Air cleaner case

Air cleaner element

Intake duct

154

Summary of Contents for MXU 700i





































































































































































Search results

Summary of Contents for MXU 700i

Reviews:

Brands by name

Popular brands

KYMCO MXU 700i, Owner'S Manual

Search results

Summary of Contents for MXU 700i

Reviews:

Brands by name

Popular brands