KYMCO MXU 700i Owner'S Manual Download

Page: 48 / 164

POTENTIAL HAZARD

Improper use of the parking brake.

WHAT CAN HAPPEN

The ATV could start moving unexpectedly if the

parking brake is not applied before starting the

engine. This could cause loss of control or a

collision.

The brake could overheat if you ride the ATV

without releasing the parking brake. You could lose

braking performance which could cause an

accident. You could also wear out the brakes

prematurely.

HOW TO AVOID THE HAZARD

Always set the parking brake before starting the

engine.

Always be sure you have released the parking

brake before you begin to ride.

4.14. LOCKING STEERING

Turn the steering handlebar right completely and

turn the key clockwise to lock the steering

handlebar.

The key can be taken out.

Turn the key counterclockwise to unlock.

Summary of Contents for MXU 700i





































































































































































Search results

Summary of Contents for MXU 700i

Reviews:

Related manuals for MXU 700i

Brands by name

Popular brands

KYMCO MXU 700i, Owner'S Manual

Search results

Summary of Contents for MXU 700i

Reviews:

Related manuals for MXU 700i

Brands by name

Popular brands