KYMCO MXU 700i, Owner'S Manual

Page: 134 / 164

8.11. VALVE CLEARANCE ADJUSTMENT
The correct valve clearance changes with use,
resulting in improper fuel/air supply or engine noise.
To prevent this, the valve clearance must be
adjusted regularly. This adjustment however, should
be left to a professional KYMCO service technician.
8.12. FRONT BRAKE PADS
The clearance between the brake pads and brake
discs is Adjusted automatically as the pads wear.
The only maintenance that is required is to replace
brake pads when they become worn. To check the
thickness of the brake pads use this procedure.
1. Remove a front wheel.
2. Measure the thickness of each brake pad.
If the thickness of less than 1.0mm
(0.039in),take your ATV to a KYMCO dealer to
have brake pads replaced.
3. Reinstall the wheel and tighten the lug nuts to
61N-m.
126