KYMCO MXU 700i, Owner'S Manual

Page: 122 / 164

1. Remove the oil filler cap (2), then remove the
drain plug/washer.
2. After the oil has completely drained, reinstall
the drain plug/washer.
Tightening torque
Drain plug: 20 N-m (2 kgf-m, 15 lbf-ft)
3. Fill the gear case with the recommended oil.
Recommended oil : SAE 90
Oil quantity :
Periodic oil change
0.23 L (0.20 lmp qt, 0.243 US qt)
4. Remove the oil level check bolt/washer (3).
Make sure the oil level reaches the oil level
check hole.
5. Install the oil filler cap and oil level check bolt.
Tightening torque:
Oil filler cap:
14.7 N-m (1.5 kgf-m, 11 lbf-ft)
Oil level check bolt:
20 N-m (2 kgf-m, 15 lbf-ft)
6. Install the skid plate.
CAUTION:
Be sure no foreign material enters the gear case.
(2)
Oil filler cap
(3)
Oil level check bolt/washer
114