KYMCO AK 550, Service Manual

Page: 436 / 461

14.Wheels
AK 550
14-20
Remove the 5 bolts of the rear brake disk.
Check the wear or damage, replace with a new one if necessary.
Remove the brake disk.
Installation torque: 3.2~3.8 kgf-m (32~38 N-m)
The bolts are all with blue Loctite (non-permanent) to the threads. Using this type
of bolts when installation.
Inspect the wheel bearings by turning them with a finger. If the bearings have
play in them or are rough replace the bearings for that wheel.
Remove one of the bearings with a bearing puller.
Special Tools- Bearing Puller: E00037